The M-6 MAX plastering machine for facades is intended for spray application of mortars with graining of up to 4 mm (suitable for mechanical application as per manufacturer’s recommendations) such as:

• gypsum or acrylic putty,
• styrofoam glue,
• facade plaster
• sound-dampening plaster,
• thin-layer plaster,
• renovation plaster,
• grouting mortar,
• injection mortars,
• bituminous coating,
• primers
• dispersive and emulsive paints.

Equipment:

• fabric hose DN 25 40 BAR (with fittings) Camlock GEKA pressure connector, 10 linear meters
• 3/8” air hose 1 x 12.5 linear meters
• control cable 13 linear meters
• pump clamp with manometer 0-60 BAR
• electrically controlled pistol for facade plasters, puttys and glues or cements (nozzle diameter 4.5 mm, nozzle diameter 6 mm, nozzle diameter 8 mm, flat nozzle)
• angle nozzle for the pistol
• cleaning brush
• stator D6-3
• rotor D6-3
• wrench for rotor installation
• set of cleaning balls
• power supply cable 3×2.5 230V (230V plug)
• compressor TA360 230V/50HZ 3,5kW 50 L
• toolbox
• air pressure regulator
• Instruction manual in polish

Technical specifications:

• PUMPING RATE: 0-20L/MIN
• PUMPING PRESSURE: 30 BAR (DEPENDING ON THE TYPE OF PUMP)
• MAX PUMPING DISTANCE: 25 M
• MAX PUMPING HEIGHT: 15 M
• PUMP DRIVE: 230V, 2.2 kW
• HOPPER VOLUME: 75 L
• WEIGHT: 90 KG
• FILLING HEIGHT: 630 MM
• DIMENSIONS LENGTH/WIDTH/HEIGHT: 125/50/63 CM (BOX 84 CM)
• PUMP CLAMP: CAMLOCK DN 25 PN 50 OUTLET WITH MANOMETER 0-60BAR
• MAX GRAINING: 4 MM

Due to smooth rotary adjustment the device can pump with variable speed from 0 to 20l/min. under pressure up to 30 BAR (depending on the pump type).